Tektronix MSO58

Commands listed in alphabetical order
Arguments
OFF argument tu
rns off bold font.
ON argument turns on bold font.
<NR1> = 0 turns off bold font; any other value turns on bold font.
Examples
REF1_D1:LABel:FONT:BOLD ON sets the font to bold.
REF1_D1:LABel:FONT:BOLD? might return : REF1_D1:LABEL:F ONT:BOLD 0
indicating the font is not bold.
REF<x>_D<x>:LABel:FONT:ITALic
This command s ets o r queries the italic state of the label of the specified digital
bit. The reference is specified by x.
Group
Digital
Syntax
REF<x>_D<x>:LABel:FONT:ITA Lic {ON|OFF|<NR1>}
Arguments
OFF argument turns off italic font.
ON argument turns on italic font.
<NR1> = 0 turns off italic font; any other value turns on italic font.
Examples
REF1_D1:LABel:FONT:ITALic OFF turns off italic font.
REF1_D1:LABel:FONT:ITALic? might return
:REF1_D1:LABEL:FONT:ITALIC 1 indicating the font is italic.
REF<x>_D<x>:LABel:FONT:SIZE
This command sets or queries the font size of the label of the specified digital bit.
The reference is spec i fied by x.
Group
Digital
Syntax
REF<x>_D<x>:LABel:FONT:SIZ E <NR1>
Arguments
<NR1> is the font size.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-611