Tektronix MSO58 User Manual

Commands listed in alphabetical order
Syntax
MEASUrement:M
EAS<x>:RESUlts:ALLAcqs:POPUl ation?
Returns
The population measur
ement value for measurement <x>.
Examples
MEASUrement:MEAS1:RESUlts :ALLAcqs:POPUlation? might return
:MEASUREMENT:MEAS1:RESULT S:ALLACQS:POPULATION 2982 5 indicating
the measurement population is 29825 measuremen
ts.
MEASUrement:MEAS<x>:RESUlts:ALLAcqs:STDDev? (Query Only)
This query-only command returns the standard deviation for all accumulated
measurement acquisitions for measurement <x>.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:RESUl ts:ALLAcqs:STDDev?
Returns
The standard deviation for all accumulated measurement acquisitions for
measurement <x>.
Examples
MEASUrement:MEAS1:RESUlts :ALLAcqs:STDDev? might
return
:MEASUREMENT:MEAS1:RESULTS: ALLACQS:STDDEV
23.5741246494459E-3
indicating the measurement standard deviation is 23.57
mV.
MEASUrement:MEAS<x>:RESUlts:CURRentacq:MAXimum? (Query Only)
This query-only command returns the maximum value found for the specified
measurement since the last statistical reset. The m easurement number is specified
by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:RESUl ts:CURRentacq:MAXimum?
Returns
The maximum value found for the specified measure ment since the last statistical
reset.
2-482 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English