Tektronix MSO58 User Manual

Commands listed in alphabetical order
Examples
DISPLAY:INTEN
SITY:BACKLIGHT:AUTODIM:TIME 30
sets the backlight to
autodim in 30 minutes.
DISPLAY:INTE
NSITY:BACKLIGHT:AUTODIM:TI ME
? might return
:DISPLAY:INTENSITY:BACKLIG HT:AUTODIM:TIME 60 indicating the
backlight will auto-dim in 60 minutes.
DISplay:MA
THFFTView<x>:AUTOScale
This command sets or returns the enabled state of autoscale for plots.
Group
Display Control
Syntax
DISplay:MATHFFTView<x>:AUT OScale {OFF|ON|<NR1>
DISplay:MATHFFTView<x>:AUT OScale?
Arguments
OFF disables the autoscale feature.
ON enables the autoscale feature.
<NR1> = 0 disables the autoscale feature; any other value enables the autoscale
feature.
Examples
DISplay:MATHFFTView1:AUTOS cale OFF disables the autoscale feature.
DISplay:MATHFFTView1:AUTOS cale? might return
:DISPLAY:MATHFFTVIEW1:AUTO SCALE 1 indicating autoscale is
on.
DISplay:MATHFFTView<x>:CURSor:ASOUrce? (Query Only)
This command queries the cursor source for plot cursor A.
Group
Cursor
Syntax
DISplay:MATHFFTView<x>:CUR Sor:ASOUrce?
Examples
DISplay:MATHFFTView1:CURSo r:ASOUrce? might return
:DISPLAY:MATHFFTVIEW1:CURS OR:ASOURCE MATH1 indicating the source
is MATH 1.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-233

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English