Commands listed in alphabetical order
Syntax
MEASUrement:C
LOCKRecovery:STAndard {CUSTom|ENET100 |
FW1394BS400B|FW1394BS800B |FW1394BS1600B|FBD1|FBD2|
FBD3|FC133|FC266|FC531|FC 1063|FC2125|FC4250|
FC8500|ENET1
000|IBA2500|IBA_GEN2|OC1|O C3|OC12|OC48|
PCIE_GEN1|PCIE_GEN2|PCIE_ GEN3|RIO125|RIO250|RIO3125|
SAS15_NOSSC|SAS3_NOSSC|SA S6_NOSSC|SAS12_NOSSC|SAS15_SSC|
SAS3_SSC|SAS
6_SSC|SAS12_SSC|SATA_GEN1| SATA_GEN2|
SATA_GEN3|USB3|XAUI|XAUI_ GEN2}
MEASUrement:CLOCKRecovery :STAndard?
Arguments
Arguments are the global clock recovery standards.
Examples
MEASUREMENT:CLOCKRECOVERY :STANDARD PCIE_GEN3 sets the standard to
PCIE_GEN3
.
MEASUREMENT:CLOCKRECOVERY :STANDARD? might return
:MEASUREMENT:CLOCKRECOVER Y:STANDARD PCIE_GEN1 indicating
the standard is set to PCIE_GEN1.
MEASUrement:DELete (No Query Form)
The c ommand deletes the specified measurement.
Group
Measurement
Syntax
MEASUrement:DELete <QString>
Arguments
<QString> is the measurement to delete. Argument is of the form "MEAS<NR 1>"
where
<NR1> is ≥1.
Examples
MEASUREMENT:DELETE "MEAS4" deletes measurement 4.
MEASUrement:DIRacmodel
This command sets o r queries the dirac model used to separate random from
deterministic jitter for jitter measurements.
Group
Measurement
Syntax
MEASUrement:DIRacmodel {PCIExpress|FIB REchannel}
MEASUrement:DIRacmodel?
2-400 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
