To Next Page

To Previous Page

Commands listed in alphabetical order

BUS:B<x>:CAN

:STANDard

This command sets or queries which CAN standard speciﬁcation to analyze the

speciﬁed CAN bus with. The bus is speciﬁed by x.

Conditions

Requires option SR-AERO.

Group

Bus

Syntax

BUS:B<x>:CAN:STANDard {CAN2X|FDISO|FDNONISO}

BUS:B<x>:CAN:STANDard?

Arguments

CAN2X sets the CAN bus standard to CAN 2.0.

FDISO sets the CAN bus standard to ISO CAN FD (11898-1:2015).

FDNONISO sets the CAN bus standard to non-ISO CAN FD (Bosch:2012).

Examples

BUS:B1:CAN:STANDARD FDISO sets the CAN standard to ISO CAN FD.

BUS:B1:CAN:STANDARD? might return :BUS:B1:CAN:STAN DARD CAN2X,

indicating that the CAN standard is CAN 2.0.

BUS:B<x>:CAN:THReshold

This command sets or queries the source channel threshold for the speciﬁed CAN

bus. The bus is speciﬁed by x.

Conditions

Requires option SR-AUTO.

Group

Bus

Syntax

BUS:B<x>:CAN:THReshold <NR3>

BUS:B<x>:CAN:THReshold?

Arguments

<NR3> is the source channel threshold for the speciﬁed CAN bus.

MSO54, MSO56, MSO58, MSO58LP Programmer 2-131

Tektronix MSO58 User Manual

Other manuals for Tektronix MSO58