Commands listed in alphabetical order
Syntax
SEARCH:SEARCH
<x>:NAVigate {NEXT|PREVious|MIN|NONE|MAX }
Arguments
NEXT goes to the next search mark.
PREVious goes to the previous search mark.
MIN goes to the first search mark.
NONE is the default se
tting when no action is being taken.
MAX goes t o the last search mark.
Examples
SEARCH:SEARCH1:NAVigate NEXT goes to the nex
t search mark.
SEARCH:SEARCH<x>:TOTAL? (Query Only)
This query-only command returns the total number of found search marks for this
search. The search number is specifi ed by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TOTAL?
Examples
SEARCH:SEARCH1:TOTAL? might return :SEARCH:SEARCH1:TOTAL 7,
indicating that there are 7 matches for search 1 .
SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition
This command specifies a field o r condition for an ARINC429 bus to search on.
The search number is specified by x.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:ARINC429A:CONDition
{SOW|LABel|DATa|LABELANDDATA|EOW|ERRor}
SEARCH:SEARCH<x>:TRIGger: A:BUS:ARINC429A:CONDition?
2-630 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
