Tektronix MSO58 User Manual

Commands listed in alphabetical order
Examples
PLOT:PLOT1:LA
Bel:FONT:TYPE Arial sets the font type to Arial.
PLOT:PLOT1:LABel:FONT:TYPE? might return
:PLOT:PLOT1:
LABEL:FONT:TYPE "Frutiger LT Std 55 Roman" indicating the
font type is Frutiger LT Std 55 Roman.
PLOT:PLOT<x>:LABel:FONT:UNDERline
This command sets or queries the underline state of the specified trend label. This
command/query only applies to Time Trend plots.
Group
Plot
Syntax
PLOT:PLOT<x>:LABel:FONT:U NDERline {<NR1>|OFF|ON}
Arguments
<NR1> = 0 disables underline font; any other value turns this feature on.
OFF disables underline font.
ON enables underline font.
Examples
PLOT:PLOT1:LABel:FONT:UND ERline 1 set the font to underlined.
PLOT:PLOT1:LABel:FONT:UND ERline?
:PLOT:PLOT1:LABEL:FONT:UN DERLINE 0
indicating the font is underlined.
PLOT:PLOT<x>:LABel:NAMe
This command sets or queries the specified trend's label. This command/query
only applies to Time Trend plots.
Group
Plot
Syntax
PLOT:PLOT<x>:LABel:NAMe <QString>
Arguments
<QString> is the label.
Examples
PLOT:PLOT1:LABel:NAMe "Time Trend number 1" sets the plot name to
Time Trend number 1.
2-524 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English