Tektronix MSO58 User Manual

Commands listed in alphabetical order
Group
Cursor
Syntax
DISplay:PLOTView<x>:CURSor :VBArs:APOSition <NR3>
DISplay:PLOTView<x>:CURSor :VBArs:APOSition?
Arguments
<NR3> is the vertical cursor A position.
Examples
DISplay:PLOTView1:CURSor:V BArs:APOSition 50.0E-9 sets the VBARS
APOSITION
to 50 ns.
DISplay:PLOTView1:CURSor:V BArs:APOSition? might return
:DISPLAY:PLOTVIEW1:CURSOR: VBARS:APOSITION -60.0796E-9
indicating the VBARS APOSITION is set to -60.08 ns.
DISplay:PLOTView<x>:CURSor:VBArs:BPOSition
This command sets or queries the vertical cursor B position of the specified cursor
in the specified view.
Group
Cursor
Syntax
DISplay:PLOTView<x>:CURSor :VBArs:BPOSition <NR3>
DISplay:PLOTView<x>:CURSor :VBArs:BPOSition?
Arguments
<NR3> is the vertical cursor B position.
Examples
:DISPLAY:PLOTVIEW1:CURSOR: VBARS:BPOSITION 50.0E-9 sets the VBARS
BPOSITION
to 50 ns.
:DISPLAY:PLOTVIEW1:CURSOR: VBARS:BPOSITION? might return
:DISPLAY:PLOTVIEW1:CURSOR: VBARS:BPOSITION -60.0796E-9
indicating the VBARS BPOSITION is set to 60.08 ns.
DISplay:PLOTView<x>:CURSor:VBArs:DELTa? (Query Only)
This command queries the delta T cursor readout value of the specified cursor
in the specified view.
Group
Cursor
MSO54, MSO56, MSO58, MSO58LP Programmer 2-257

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English