Tektronix MSO58 User Manual

Commands listed in alphabetical order
TRIGGER:A:TRA
NSITION:SOURCE?
might return
:TRIGGER:A:TRANSITION:SOU RCE CH2 indicating that channel 2 is the
source for the transition trigger.
TRIGger:{A|B}:TRANsition:WHEn
This command specifies whether to check for a transitioning s i gnal that is faster or
slower than the specified delta time.
Group
Trigger
Syntax
TRIGger:{A|B}:TRANsition: WHEn {SLOWer|FASTer|EQual|UN EQual}
TRIGger:{A|B}:TRANsition: WHEn?
Arguments
FASTer sets t he trigger to occur when the signal transition time is faster than the
time set by
TRIGger:A:TRANsition:DELTati me.
SLOWer sets the trigger to occur when the signal transition time is slower than the
time set by.
TRIGger:A:TRANsition:DELTati me.
EQual sets the trigger to occur when the signal transition time is equal to the time
set by
TRIGger:A:TRANsition:DELTati me.
UNEQual sets the trigger to o ccur when the signal transition time is not equal to
the time s et by
TRIGger:A:TRANsition:DELTa time.
Examples
TRIGGER:A:TRANSITION:WHEN SLOWER sets the trigger to occur
when the signal transition time is slower than the time set by the
TRIGger:A:TRANsition:DELT atime command.
TR
IGGER:A:TRANSITION:WHEN?
might return
:TRIGGER:A:TRANSITION:WHE N FASTER
TRIGger:{A|B}:TYPe
This command sets or queries the type of A or B trigger.
Group
Trigger
Syntax
TRIGger:{A|B}:TYPe {EDGE|WIDth|TIME Out|RUNt|WINdow |LOGIc|
SETHold|TRANsition|BUS}
TRIGger:{A|B}:TYPe?
2-870 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English