Tektronix MSO58 User Manual

Commands listed in alphabetical order
Related Commands
POWer:POWer<x
>:SWITCHINGLOSS:LEVELUNIts
Arguments
<NR1> ranges from – 100 to 100
Examples
POWer:POWer1:SWITCHINGLOS S:ILEVELAbs 1.2 sets the current level
(Ton-Start & Stop) value as 1.2 for the switching loss measurement in the power
measurement badge 1.
POWer:POWer<x>:SWITCHINGLOSS:ILEVELPct
This command sets or queries the current level (Ton-Start & Stop) in percentage
for switching loss measurement in the specified power measurement badge. The
power measurement badge is specified by x.
Conditions
Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group
Power
Syntax
POWer:POWer<x>:SWITCHINGL OSS:ILEVELPct <NR1>
POWer:POWer<x>:SWITCHINGL OSS:ILEVELPct?
Related Commands
POWer:POWer<x>:SWITCHINGLOSS:LEVELUNIts
Arguments
<NR1> ranges from 0.0001 to 90
Examples
POWer:POWer1:SWITCHINGLOS S:ILEVELPct 6 sets the current level
(Ton-Start & Stop) value as 6 percentage for the switching loss measurement in
the power measurement badge 1.
POWer:POWer<x>:SWITCH
INGLOSS:ISOURce
This command sets or queries the current source for the switching loss
measurement in the specified power m easurement badge. The power measurement
badge is specified by x.
Conditions
Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group
Power
2-588 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English