Tektronix MSO58

Commands listed in alphabetical order
Related Commands
ETHERnet:NETW
ORKCONFig,
ETHERnet:SUBNETMask,
ETHERnet:GATEWay:IPADDress
Arguments
<QString> is a standard IP address value, enclosed in quotes.
Examples
ETHERNET:IPADDRESS "123.121.13.214" sets the oscilloscope's IP address.
ETHERnet:LXI:LAN:RESET (No Query Form)
This command resets the LXI local are a network.
Group
Ethernet
Syntax
ETHERnet:LXI:LAN:RESET
Examples
ETHERnet:LXI:LAN:RESET resets the LXI local area network.
ETHERnet:LXI:LAN:SERVICENAMe
This command sets or queries the service name used for the LXI interface.
Group
Ethernet
Syntax
ETHERnet:LXI:LAN:SERVICENA Me QString
ETHERnet:LXI:LAN:SERVICENA Me?
Arguments
QStringisaquotedstringofupto64charactersthatspecifies the mDNS service
name used for the LXI interface.
Examples
ETHERnet:LXI:LAN:SERVICENA Me? might return "Tektronix Oscilloscope
MSO5 053CVV"
MSO54, MSO56, MSO58, MSO58LP Programmer 2-325