Tektronix MSO58

Commands listed in alphabetical order
Examples
POWer:POWer1:
REFLevels:ABSolute:HYSTeresi s 10
sets the reference
level hysteresis value in absolute to 10.
POWer:POWer<x>:REFLevels:ABSolute:RISEHigh
This command sets or queries the rising edge for high reference level in absolute
units for the specified power measurement badge. The power measurement badge
is specified by x.
Conditions
Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group
Power
Syntax
POWer:POWer<x>:REFLevels: ABSolute:RISEHigh <NR1>
POWer:POWer<x>:REFLevels: ABSolute:RISEHigh?
Related Commands
POWer:POWer<x>:REFLevels:METHod, POWer:POWer<x>:REFLevels:
ABSolute:TYPE
Arguments
<NR1> ranges from –40000 to 40000
Examples
POWer:POWer1:REFLevels:AB Solute:RISEHigh 1 sets t
he high reference
level for rising edge as 1 volt.
POWer:POWer<x>:REFLevels:ABSolute:RISELow
This command sets or queries the rising edge for low reference level in absolute
units for the specified power measurement badge. The power measurement badge
is specified by x.
Conditions
Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group
Power
Syntax
POWer:POWer<x>:REFLevels: ABSolute:RISELow <NR1>
POWer:POWer<x>:REFLevels: ABSolute:RISELow?
2-554 MSO54, MSO56, MSO58, MSO58LP Programmer