To Next Page

To Previous Page

Commands listed in alphabetical order

Group

Trigger

Syntax

TRIGger:{A|B}:BUS:B<x>:AU Dio:CONDition {SOF|DATa}

TRIGger:{A|B}:BUS:B<x>:AU Dio:CONDition?

Arguments

SOF enables triggering on a word select or start of frame (depending on Audio

Type).

DATa enables triggering on matching data.

Examples

TRIGger:A:BUS:B1:AUDio:CO NDition SOF sets the condition to start of

frame.

TRIGger:A:BUS:B1:AUDio:CO NDition? might return

:TRIGGER:A:BUS:B1:AUDIO:C ONDITION DATA indicating the

condition is data.

TRIGger:{A|B}:BUS:B<x>:AUDio:DATa:HITDMVALue

This command sets or queries the binary data string for the high data word to be

used when triggering on an TDM audio bus signal. The trigger condition must be

set to DATa using

TRIGger:{A|B}:BUS:B<x>:AUD io:CONDition.

Group

Trigger

Syntax

TRIGger:{A|B}:BUS:B<x>:AU Dio:DATa:HITDMVALue <QString>

TRIGger:{A|B}:BUS:B<x>:AU Dio:DATa:HITDMVALue?

Arguments

<QString> is the binary data string for the high data word to be used when

triggering on an TDM audio bus signal.

Examples

TRIGger:A:BUS:B1:AUDio:DA Ta:HITDMVALue "1100" sets the high value

to 1100.

TRIGger:A:BUS:B1:AUDio:DA Ta:HITDMVALue? might

return :TRIGGER:A:BUS:B1:AUDIO:DATA:HITDMVALUE

"XXXXXXXXXXXXXXXXXXXX1010 " indicating the high value is 1010.

2-766 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 User Manual

Other manuals for Tektronix MSO58