Tektronix MSO58

Commands listed in alphabetical order
Examples
POWer:POWer1:
RESUlts:CURRentacq:POHCL? "harmonics"
might return
251.3529788962128E-3, indicating the limit of partial odd harmonic current
for the power measurement badge 1.
POWer:POWer
<x>:RESUlts:CURRentacq:POHCM? (Query Only)
This command queries the measured value of partial odd harmonic current for the
specified power measurement badge. The power measurement badge is specified
by x.
Conditions
Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group
Power
Syntax
POWer:POWer<x>:RESUlts:CU RRentacq:POHCM? "harmonics"
Examples
POWer:POWer1:RESUlts:CURR entacq:POHCM? "harmonics" might return
515.422617782020E-6, indicating the measured value of partial odd harmonic
current for the power measurement badge 1.
POWer:POWer<x>:RESUlts:CURRentacq:POHCS? (Query Only)
This command queries the status of partial odd harmonic current for the specified
power measurement badge. The power measurement badge is specified by x.
Conditions
Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group
Power
Syntax
POWer:POWer<x>:RESUlts:CU RRentacq:POHCS? "harmonics"
Examples
POWer:POWer1:RESUlts:CURR entacq:POHCS? "harmonics" might return
“Pass”, indicating the status of partial odd harmonic current for the power
measurement badge 1.
2-576 MSO54, MSO56, MSO58, MSO58LP Programmer