Tektronix MSO58

Commands listed in alphabetical order
CH<x>_D<x>:L
ABel:FONT:TYPE
This command sets or queries the font type of the label of the specified digital bit,
such a s Arial or Times New Roman. The channel is specified by x.
Group
Digital
Syntax
CH<x>_D<x>:LABel:FONT:TYP E <QString>
Arguments
<QString> is the font type of the label.
Examples
CH1_D1:LABel:FONT:TYPE "Monospace" sets the font to Monospace.
CH1_D1:LABel:FONT:TYPE? might r eturn :CH1_D1:LABEL:FONT: TYPE
"Frutiger LT Std 55 Roman"
.
CH<x>_D<x>:LABel:FONT:UNDERline
This command sets or queries the underline state of the label of the specified
digital bit. The channel is specified by x.
Group
Digital
Syntax
CH<x>_D<x>:LABel:FONT:UND ERline {ON|OFF|<NR1>}
Arguments
OFF argument turns off underline font.
ON argument turns on underline font.
<NR1> = 0 turns off underline font; any other value turns on underline font.
Examples
CH1_D1:LABel:FONT:UNDERli ne ON turns on underline font.
CH1_D1:LABel:FONT:UNDERli ne? might return
:CH1_D1:LABEL:FONT:UNDERL INE 0 indicating the underline font is off.
CH<x>_D<x>:LABel:NAMe
Sets or queries the label o f the specified digital bit. The channel is specified by x.
2-210 MSO54, MSO56, MSO58, MSO58LP Programmer