Tektronix MSO58

Commands listed in alphabetical order
MEASUrement:M
EAS2:BURSTEDGTYPe?
might return
:MEASUREMENT:MEAS2:BURSTE DGTYPE RISE indicating a burst
with a rising edge.
MEASUrement
:MEAS<x>:CCRESUlts:ALLAcqs:MAXimum? (Query Only)
This query-only command returns the maximum cycle-cycle value for the
specified measurement for all acquisitions. Measurements are specified by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:CCRES Ults:ALLAcqs:MAXimum?
Returns
The maximum cycle-cycle statistic value for the specified measurement for all
acquisitions.
Examples
MEASUrement:MEAS2:CCRESUl ts:ALLAcqs:MAXimum? might return
:MEASUREMENT:MEAS2:CCRESU LTS:ALLACQS:MAXIMUM 9.91E +37.
MEASUrement:MEAS<x>:CCRESUlts:ALLAcqs:MEAN? (Query Only)
This query-only command returns the mean cycle-cycle value for the specified
measurement for all acquisitions. Measurements are specified by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:CCRES Ults:ALLAcqs:MEAN?
Returns
The mean cycle-cycle statistic value for the specified measurement for all
acquisitions.
Examples
MEASUrement:MEAS2CCRESUlt s:ALLAcqs:MEAN? might return
:MEASUREMENT:MEAS2:CCRESU LTS:ALLACQS:MEAN 9.91E+37.
MEASUrement:MEAS<x>:CCRESUlts:ALLAcqs:MINimum? (Query Only)
This query-only command returns the minimum cycle-cycle value for the specified
measurement for all acquisitions. Measurements are specified by x.
2-426 MSO54, MSO56, MSO58, MSO58LP Programmer