To Next Page

To Previous Page

Commands listed in alphabetical order

BUS:B1:AUDIO:

CLOCK:SOURCE?

might return

:BUS:B1:AUDIO:CLOCK:SOURC E CH1 indicating that the clock source is

set to channel 1.

BUS:B<x>:AU

Dio:CLOCk:THReshold

This command sets or queries the audio clock source threshold for the speciﬁed

bus. The bus is speciﬁed by x.

Conditions

Requires option S R-AUDIO.

Group

Bus

Syntax

BUS:B<x>:AUDio:CLOCk:THRe shold <NR3>

BUS:B<x>:AUDio:CLOCk:THRe shold?

Related Commands

BUS:B<x>:AUDio:CLOCk:SOUrce

Arguments

<NR3> is the audio clock source threshold for the speciﬁed bus.

Examples

BUS:B3:AUDIO:CLOCK:THRESH OLD 500.0E-3 sets the Bus 3 audio Cclock

source threshold to 500.0 mV.

BUS:B2:AUDIO:CLOCK:THRESH OLD? might return

:BUS:B2:AUDIO:CLOCK:THRES HOLD 1.0 indicates the Bus 2 audio clock

source threshold is set to 1.0 V.

BUS:B<x>:AUDio:DATa:POLarity

This command sets or queries the audio data source polarity for the speciﬁed

audio bus. The bus is speciﬁed by x.

Conditions

Requires option S R-AUDIO.

Group

Bus

Syntax

BUS:B<x>:AUDio:DATa:POLar ity {HIGH|LOW}

BUS:B<x>:AUDio:DATa:POLar ity?

2-120 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 User Manual

Other manuals for Tektronix MSO58