Tektronix MSO58

Commands listed in alphabetical order
With :HEADer OF
F
and :VERBose OFF,the:ACQuire:MODe? query might
return:
SAM
VERTical:DESKew:FROM:CUSTOMPROPAgation
This command sets or queries a target (FROM) delay that you ca n specify when
the propagation delay of the target (FROM) probe used for deskew cannot be
detected automatically.
Group
Vertical
Syntax
VERTical:DESKew:FROM:CUSTO MPROPAgation <NR3>
VERTical:DESKew:FROM:CUSTO MPROPAgation?
Arguments
<NR3> is a target (FROM) delay that you can specify when the propagation delay
of the target (FROM) probe used for deskew cannot be detected automatically.
Examples
VERTICAL:DESKEW:FROM:CUSTO MPROPAGATION 0.25e-9 sets the custom
delay to 250 ps.
VERTICAL:DESKEW:FROM:CUSTO MPROPAGATION? might return
:VERTICAL:DESKEW:FROM:CUST OMPROPAGATION 0.0E+0 indicating the
custom delay is 0.0 s.
VERTical:DESKEW:FROM:SOUrce
This command sets or queries the source channel for performing
channel-to-channel deskew adjustment. Sources can be any of the analog
channels.
Group
Vertical
Syntax
VERTical:DESKEW:FROM:SOUrc e CH<x>
VERTical:DESKEW:FROM:SOUrc e?
Arguments
The vertical deskew source.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-887