Tektronix MSO58

Command groups
Table 2-27: Ethernet Commands (cont.)
Command Description
ETHERnet:NAME
Sets or queries the instrument Ethernet hostname assigned to the oscilloscope.
ETHERnet:NETWORKCONFig Specifies the Ethernet network configuration setting.
ETHERnet:PING Causes the o scilloscope to ping the gateway IP address.
ETHERnet:PING:STATus? Returns the results from sending the ETHERnet:PING command to ping the
gateway IP address.
ETHERnet:SUBNET Mask Specifies the network subnet mask value.
2-32 MSO54, MSO56, MSO58, MSO58LP Programmer