Tektronix MSO58 User Manual

Status and Events
Table 3-6: Execution Error Messages (EXE Bit 4) (cont.)
Code Message
2203
Measurement error, No period, second waveform
2204
Measurement error, Low amplitude, second waveform
2205
Measurement error, Low amplitude, second waveform
2206 Measurement error, Invalid gate
2207
Measurement error, Measurement overflow
2208
Measurement error, No backwards Mid Ref crossing
2209
Measurement error, No second Mid R ef crossing
2210
Measurement error, No Mid R ef crossing, second waveform
2211
Measurement error, No backwards Mid Ref crossing
2212 Measurement error, No negative crossing
2213 Measurement error, No positive crossing
2214
Measurement error, No crossing, target waveform
2215
Measurement error, No crossing, second waveform
2216
Measurement error, No crossing, target waveform
2217
Measurement error, Constant waveform
2219 Measurement error, No valid edge - No arm sample
2220 Measurement error, No valid edge - No arm cross
2221 Measurement error, No valid edge - No trigger cross
2222 Measurement error, No valid edge - No second cross
2223
Measurement error, Waveform mismatch
2224 Measurement error, WAIT calculating
2225
Measurement error, No waveform to measure
2226
Measurement error, Null Waveform
2227
Measurement error, Positive and Negative Clipping
2228
Measurement error, Positive Clipping
2229
Measurement error, Negative Clipping
2230
Measurement error, High Ref < Low Ref
2231 Measurement error, No statistics available
2233
Requested waveform is temporarily unavailable
2235 Math error, invalid math description
2240 Invalid password
2241
Waveform requested is invalid
2244
Source waveform is not active
2245
Saveref error, selected channel is turned off
2250
Reference error, the reference waveform file is invalid
2253
Reference error, too many points received
2254
Reference error, too few points received
3-16 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English