Agilent Technologies InfiniiVision 5000 Series - Page 71

Commands Quick Reference 4
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 71
:MEASure:RISEtime
[<source>] (see
page 294)
:MEASure:RISEtime?
[<source>] (see
page 294)
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= rise time in
seconds in NR3 format
:MEASure:SDEViation
[<source>] (see
page 295)
:MEASure:SDEViation?
[<source>] (see
page 295)
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= calculated
std deviation in NR3 format
:MEASure:SHOW {1 |
ON} (see page 296)
:MEASure:SHOW? (see
page 296)
{1}
:MEASure:SOURce
<source1>
[,<source2>] (see
page 297)
:MEASure:SOURce? (see
page 297)
<source1,2> ::= {CHANnel<n> |
FUNCtion | MATH | EXTernal}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= {<source> |
NONE}
:MEASure:STATistics
<type> (see page 299)
:MEASure:STATistics?
(see page 299)
<type> ::= {{ON | 1} | CURRent |
MEAN | MINimum | MAXimum | STDDev
| COUNt}
ON ::= all statistics returned
:MEASure:STATistics:I
NCRement (see
page 300)
n/a n/a
:MEASure:STATistics:R
ESet (see page 301)
n/a n/a
n/a :MEASure:TEDGe?
<slope><occurrence>[,
<source>] (see
page 302)
<slope> ::= direction of the
waveform
<occurrence> ::= the transition
to be reported
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= time in
seconds of the specified
transition
Table 12 :MEASure Commands Summary (continued)
Command Query Options and Query Returns