Dell PowerConnect 6224 - Page 110

110 Command Groups
PIM-DM
PIM-SM
show ipv6 ospf stub table Displays the OSPF stub table. PE
show ipv6 ospf virtual-
link
Displays the OSPF Virtual Interface information
for a specific area and neighbor.
PE
show ipv6 ospf virtual-
link brief
Displays the OSPFV3 Virtual Interface
information for all areas in the system.
PE
trapflags Enables OSPF traps ROSV3
NOTE: *For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Command Description Mode*
ip pimdm Enables the administrative mode of PIM-DM in
the router.
GC
ip pimdm mode Sets administrative mode of PIM-DM on an
interface to enabled.
IC
ip pimdm query-interval Configures the transmission frequency of hello
messages between PIM enabled neighbors.
IC
show ip pimdm Displays system-wide information for PIM-DM. PE
show ip pimdm interface Displays interface information for PIM-DM on
the specified interface.
PE
show ip pimdm interface
stats
Displays the statistical information for PIM-
DM on the specified interface.
UE
show ip pimdm neighbor Displays the neighbor information for PIM-DM
on the specified interface.
PE
NOTE: *For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Command Description Mode*
ip pimsm Sets administrative mode of PIM-SM multicast
routing across the router to enabled.
GC
Command Description Mode*