364 IP Addressing Commands
show arp switch
Use the show arp switch command in Privileged EXEC mode to display the
ARP cache entries learned on the management port.
Syntax
show arp switch
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Note that this command only show ARP entries used by the management
interface. It is logically separate from the ARP table used by the routing
interfaces. See the show arp command for details on how to view ARP entries
for the routing interfaces.
Example
The following example displays ARP table information.
console#show arp switch
MAC Address IP Address Interface
------------------- ---------------- ------------
0016.9CE1.D800 10.27.6.1 1/g37
show hosts
Use the show hosts command in User EXEC mode to display the default
domain name, a list of name server hosts, and the static and cached list of
host names and addresses. The command itself shows hosts [hostname].
• Host name. (Range: 1–255 characters)
To Next Page
Loading...
