EasyManua.ls Logo

Dell PowerConnect 6224 - Page 703

Dell PowerConnect 6224
1372 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IGMP Proxy Commands 703
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example resets the host interface status parameters of the
IGMP Proxy router.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp-proxy reset-status
ip igmp-proxy unsolicited-report-interval
Use the ip igmp-proxy unsolicited-report-interval command in Interface
Configuration mode to set the unsolicited report interval for the IGMP Proxy
router. This command is valid only if IGMP Proxy on the interface is enabled.
Syntax
ip igmp-proxy unsolicited-report-interval
seconds
seconds
— Unsolicited report interval. (Range: 1-260 seconds)
Default Configuration
The default configuration is 1 second.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.

Table of Contents

Other manuals for Dell PowerConnect 6224

Related product manuals