704 IGMP Proxy Commands
Example
The following example sets 10 seconds as the unsolicited report interval for
the IGMP Proxy router.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp-proxy unsolicited-
report-interval 10
show ip igmp-proxy
Use the show ip igmp-proxy command in Privileged EXEC mode to display a
summary of the host interface status parameters. It displays status parameters
only when IGMP Proxy is enabled.
Syntax
show ip igmp-proxy
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays a summary of the host interface status
parameters.
console#show ip igmp-proxy
Interface Index................................
vlan13
Admin Mode.....................................
Enable
To Next Page
Loading...
