802 IPv6 Routing Commands
Default Configuration
There is no default configuration for this command.
User Guidelines
The command displays the following parameters only when you enable MLD
Proxy:
Example
console#show ipv6 mld-proxy
Interface Index................................ vlan
10
Admin Mode.....................................
Enabled
Operational Mode...............................
Enabled
Interface Index The interface number of the MLD Proxy interface.
Admin Mode Indicates whether MLD Proxy is enabled or disabled. This is a
configured value.
Operational Mode Indicates whether MLD Proxy is operationally enabled or
disabled. This is a status parameter.
Version The present MLD host version that is operational on the proxy
interface.
Number of
Multicast Groups
The number of multicast groups that are associated with the
MLD-Proxy interface.
Unsolicited Report
Interval
The time interval at which the MLD-Proxy interface sends
unsolicited group membership reports.
Querier IP Address
on Proxy Interface
The IP address of the Querier, if any, in the network attached to
the upstream interface (MLD-Proxy interface).
Older Version 1
Querier Timeout
The interval used to timeout the older version 1 queriers.
Proxy Start
Frequency
The number of times the MLD-Proxy has been stopped and
started.
To Next Page
Loading...
