Dell PowerConnect 6224 - Page 845

Multicast Commands 845
Source IP Group
IP Protocol Interface Interface List
--------- -------- -------- ------- ----
-----------
console#show ip mcast mroute detail
Multicast Route Table
Expiry Up Time
Source Ip Group Ip Time(secs) (secs) RPF
Neighbor Flags
--------- ----------- ---------- ----------- --------
------- -----
show ip mcast mroute group
Use the show ip mcast mroute group command in Privileged EXEC mode to
display the multicast configuration settings such as flags, timer settings,
incoming and outgoing interfaces, RPF neighboring routers, and expiration
times of all the entries in the multicast mroute table containing the
groupipaddr value.
Syntax
show ip mcast mroute group groupipaddr {detail | summary}
• groupipaddr — IP address of the multicast group.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.