PARAGRAPH PAGE
13. SEALED SPLICE CONFIGURATIONS WITH SHIELD TERMINATION RINGS AND SHIELD
TERMINATOR BANDS FOR SHIELDED WIRE AND SHIELDED CABLE FOR HIGH
TEMPERATURE (continued) 249
E. Sealed Splice Configurations for Shielded Wire and Cable for High Temperature - One
Shielded Cable to One Shielded Cable - Shield Termination Rings, Shield Terminator
Bands, Tape, Sleeve 281
14. SEALED SPLICE CONFIGURATIONS WITH SOLDER SHIELD SPLICE KITS FOR SHIELDED
WIRE AND SHIELDED CABLE 291
A. Splice Assembly Configurations 291
B. Sealed Splice Configurations for Shielded Wire and Cable - Solder Shield Splice Kit -
One Shielded Wire to One Shielded Wire 294
C. Sealed Splice Configurations for Shielded Wire and Cable - Solder Shield Splice Kit -
One 10 AWG Shielded Wire to One 16 AWG Shielded Wire Used on Pass Thru
Bulkheads 295
D. Sealed Splice Configurations for Shielded Wire and Cable - Solder Shield Splice Kit -
One Shielded Wire to One Shielded Wire and One Unshielded Wire 302
E. Sealed Splice Configurations for Shielded Wire and Cable - Solder Shield Splice Kit -
Three Shielded Wires to Three Shielded Wires 303
F. Sealed Splice Configurations for Shielded Wire and Cable - Solder Shield Splice Kit -
Four Shielded Wires to Four Shielded Wires 304
G. Sealed Splice Configurations for Shielded Wire and Cable - Solder Shield Splice Kit -
One Class 2 Shielded Cable to One Class 2 Shielded Cable 306
H. Sealed Splice Configurations for Shielded Wire and Cable - Solder Shield Splice Kit -
One Class 2 Shielded Cable to One Class 2 Shielded Cable and One Unshielded Wire 307
I. Sealed Splice Configurations for Shielded Wire and Cable - Solder Shield Splice Kit -
Two Class 2 Shielded Cables to Two Class 2 Shielded Cables 309
J. Sealed Splice Configurations for Shielded Wire and Cable - Solder Shield Splice Kit -
Two Class 2 Shielded Cables to Three Class 2 Shielded Cables 310
K. Sealed Splice Configurations for Shielded Wire and Cable - Solder Shield Splice Kit -
Three Class 2 Shielded Cables to Three Class 2 Shielded Cables 313
L. Sealed Splice Configurations for Shielded Wire and Cable - Solder Shield Splice Kit -
One Class 3 Shielded Cable to Three Shielded Wires 315
M. Sealed Splice Configurations for Shielded Wire and Cable - Solder Shield Splice Kit -
One Class 3 Shielded Cable to One Class 3 Shielded Cable 316
N. Sealed Splice Configurations for Shielded Wire and Cable - Solder Shield Splice Kit -
One Class 3 Shielded Cable to Two Class 3 Shielded Cables 318
O. Sealed Splice Configurations for Shielded Wire and Cable - Solder Shield Splice Kit -
One Class 3 Shielded Cable to Three Class 3 Shielded Cables 320
P. Sealed Splice Configurations for Shielded Wire and Cable - Solder Shield Splice Kit -
Two Class 3 Shielded Cables to Two Class 3 Shielded Cables 323
Q. Sealed Splice Configurations for Shielded Wire and Cable - Solder Shield Splice Kit -
Two Class 3 Shielded Cables to Three Class 3 Shielded Cables 326
ASSEMBLY OF SPLICES
707, 727-787
STANDARD WIRING PRACTICES MANUAL
20-30-12
Page 5
Jun 15/2021D6-54446
ECCN 9E991 BOEING PROPRIETARY - See title page for details
To Next Page
Loading...
