Cypress FM4 Series - CHAPTER 2-3: High-Speed CR Trimming

FM4 Peripheral Manual, Doc. No. 002-04856 Rev. *E 113
CHAPTER 2-3: High-Speed CR Trimming
This chapter explains the High-Speed CR Trimming Function.
1. High-Speed CR Trimming Function Overview
2. High-Speed CR Trimming Function Configuration and Block Diagram
3. High-Speed CR Trimming Function Operation
4. High-Speed CR Trimming Function Setup Procedure Example
5. High-Speed CR Trimming Function Register List
6. High-Speed CR Trimming Function Usage Precautions