Cypress FM4 Series - Low-Voltage Detection Circuit Status Register (LVD_STR2)

CHAPTER 5: Low-voltage Detection
188 FM4 Peripheral Manual, Doc. No. 002-04856 Rev. *E
5.5 Low-voltage Detection Circuit Status Register (LVD_STR2)
The Low-voltage Detection Circuit Status Register (LVD_STR2) checks the operation status of a
low-voltage detection interrupt.
bit
7
6
5
4
3
2
1
0
Field
LVDIRDY
Reserved
Attribute
R
-
Initial value
0
-
[bit7] LVDIRDY : Low-voltage detection interrupt status flag
bit
Description
0
Stabilization wait state or monitoring stop state [Initial value]
1
Monitoring state
This bit has no effect when written.
[bit6:0] Reserved: Reserved bits
The read value is undefined.
These bits have no effect when written.
Note:
− This register is not initialized by the deep standby transition reset.