Cypress FM4 Series - Auto CMD Error Status Register

CHAPTER 15: SD Card Interface
868 FM4 Peripheral Manual, Doc. No. 002-04856 Rev. *E
2.23 Auto CMD Error Status Register
This register is used to indicate the CMD12 response error of Auto CMD12 and the CMD23 response
error of Auto CMD23.
D15 D08
D07
D06 D05
D04
D03
D02
D01
D00
Rsvd
Command Not Issued by Auto
CMD12 Error
Rsvd
Auto CMD Index Error
Auto CMD
End Bit Error
Auto CMD CRC Error
Auto CMD Timeout Error
Auto CMD12 not executed
For details of this register, refer to SD Specifications Part A2.