Cypress FM4 Series - Low-Speed CR Prescaler Overview

CHAPTER 2-4: Low-Speed CR Prescaler
132 FM4 Peripheral Manual, Doc. No. 002-04856 Rev. *E
1. Low-speed CR Prescaler Overview
This section shows the overview of low-speed CR prescaler.
Low-speed CR Prescaler
By setting the low-speed CR prescaler load register(LCR_PRSLD), the low-speed CR prescaler divides
low-speed CR and generates low-speed CR clock(CLKLC).
This macro can correct the accuracy of low-speed CR. For the correcting method, see the example of
correcting low-speed CR.