CHAPTER 7-2: VBAT Domain(A)
FM4 Peripheral Manual, Doc. No. 002-04856 Rev. *E 289
7.7 VDET Register
VDET Register indicates the state of power-on circuit and clears the power-on signal.
The interface circuit type for this register is type 4.
[bit7] PON: Power-on bit
This bit indicates the state of the power-on circuit and clears the power-on signal.
Indicates that the initialization signal of the power-on circuit has been cleared.
Indicates that the power-on circuit has output the initialization signal.
Clears the power-on signal.
Writing 1 to this bit has no effect on operation.
[bit6:0] Reserved: Reserved bits
These bits read 0b0000000.
In a write access to these bits, write 0b0000000 to them.
To Next Page
Loading...
