Cypress FM4 Series - IRQ076;077;111 Batch Read Register (Irqxxxmon)

CHAPTER 8: Interrupts
414 FM4 Peripheral Manual, Doc. No. 002-04856 Rev. *E
4.24 IRQ076/077/111 Batch Read Register (IRQxxxMON)
The IRQ076MON, IRQ077MON and IRQ111MON Registers can read out at once the interrupts
(interrupts of A/D converter unit 0 to unit 2) assigned to exception no. 92, no. 93 and no. 127 respectively.
Register configuration
bit
31
8
Field
Reserved
Attribute
R
Initial value
0x000000
bit
7
6
5
4
3
2
1
0
Field
Reserved
ADCINT
Attribute
R
R
Initial value
000
00000
Register function
[bit31:5] Reserved: Reserved bits
A reserved bit reads 0.
[bit4:0] ADCINT
bit
Value
Description
4
0
There is no range comparison result interrupt request of the A/D converter unit
corresponding to the IRQxxxMON Register.
1
A range comparison result interrupt request of the A/D converter unit
corresponding to the IRQxxxMON Register has been made.
3
0
There is no conversion result comparison interrupt request of the A/D converter
unit corresponding to the IRQxxxMON Register.
1
A conversion result comparison interrupt request of the A/D converter unit
corresponding to the IRQxxxMON Register has been made.
2
0
There is no FIFO overrun interrupt request of the A/D converter unit
corresponding to the IRQxxxMON Register.
1
A FIFO overrun interrupt request of the A/D converter unit corresponding to the
IRQxxxMON Register has been made.
1
0
There is no scan conversion interrupt request of the A/D converter unit
corresponding to the IRQxxxMON Register.
1
A scan conversion interrupt request of the A/D converter unit corresponding to the
IRQxxxMON Register has been made.
0
0
There is no priority conversion interrupt request of the A/D converter unit
corresponding to the IRQxxxMON Register.
1
A priority conversion interrupt request of the A/D converter unit corresponding to
the IRQxxxMON Register has been made.
See Table 3-1 and Table 3-2 for the relationship between exception no. and interrupt.