Cypress FM4 Series - Relocate Interrupt Selection Register (Irqxxxsel)

CHAPTER 8: Interrupts
FM4 Peripheral Manual, Doc. No. 002-04856 Rev. *E 387
4.2 Relocate Interrupt Selection Register (IRQxxxSEL)
The Relocate Interrupt Selection Register (IRQxxxSEL) is a register selecting a relocate interrupt to be
input to one of the exceptions between exception no. 19 and exception no. 26 (IRQ003 to IRQ010). There
are eight Relocate Interrupt Selection Registers, IRQ003SEL to IRQ010SEL. The IRQ003SEL to
IRQ010SEL Registers select the interrupts to be input to IRQ003 to IRQ010 respectively.
Register configuration
bit
31
16
15
8
7
0
Field
SELBIT[15:0]
Reserved
SELIRQ[7:0]
Attribute
R/W
R
R/W
Initial value
0x0000
0x00
0x00
Register function
[bit31:16] SELBIT[15:0]
A bit in SELBIT[15:0] specifies the bit position to which one of the interrupt sources aggregated by logical
OR is moved to the relocate interrupt. The peripheral interrupt to be generated by those interrupt sources
is specified in SELIRQ[7:0].
For the bit position, see the column of bit in Table 3-1 and Table 3-2.
Bit
Value
Description
15
0
Bit15 of the interrupt source is not moved to the relocate interrupt.
1
Bit15 of the interrupt source is moved to bit15 of the relocate interrupt.
14
0
Bit14 of the interrupt source is not moved to the relocate interrupt.
1
Bit14 of the interrupt source is moved to bit14 of the relocate interrupt.
13
0
Bit13 of the interrupt source is not moved to the relocate interrupt.
1
Bit13 of the interrupt source is moved to bit13 of the relocate interrupt.
12
0
Bit12 of the interrupt source is not moved to the relocate interrupt.
1
Bit12 of the interrupt source is moved to bit12 of the relocate interrupt.
11
0
Bit11 of the interrupt source is not moved to the relocate interrupt.
1
Bit11 of the interrupt source is moved to bit11 of the relocate interrupt.
10
0
Bit10 of the interrupt source is not moved to the relocate interrupt.
1
Bit10 of the interrupt source is moved to bit10 of the relocate interrupt.
9
0
Bit9 of the interrupt source is not moved to the relocate interrupt.
1
Bit9 of the interrupt source is moved to bit9 of the relocate interrupt.
8
0
Bit8 of the interrupt source is not moved to the relocate interrupt.
1
Bit8 of the interrupt source is moved to bit8 of the relocate interrupt.
7
0
Bit7 of the interrupt source is not moved to the relocate interrupt.
1
Bit7 of the interrupt source is moved to bit7 of the relocate interrupt.
6
0
Bit6 of the interrupt source is not moved to the relocate interrupt.
1
Bit6 of the interrupt source is moved to bit6 of the relocate interrupt.
5
0
Bit5 of the interrupt source is not moved to the relocate interrupt.
1
Bit5 of the interrupt source is moved to bit5 of the relocate interrupt.
4
0
Bit4 of the interrupt source is not moved to the relocate interrupt.
1
Bit4 of the interrupt source is moved to bit4 of the relocate interrupt.
3
0
Bit3 of the interrupt source is not moved to the relocate interrupt.
1
Bit3 of the interrupt source is moved to bit3 of the relocate interrupt.
2
0
Bit2 of the interrupt source is not moved to the relocate interrupt.
1
Bit2 of the interrupt source is moved to bit2 of the relocate interrupt.
1
0
Bit1 of the interrupt source is not moved to the relocate interrupt.
1
Bit1 of the interrupt source is moved to bit1 of the relocate interrupt.
0
0
Bit0 of the interrupt source is not moved to the relocate interrupt.
1
Bit0 of the interrupt source is moved to bit0 of the relocate interrupt.