Cypress FM4 Series - Low-Voltage Detection Interrupt Factor Clear Register (LVD_CLR)

CHAPTER 5: Low-voltage Detection
186 FM4 Peripheral Manual, Doc. No. 002-04856 Rev. *E
5.3 Low-voltage Detection Interrupt Factor Clear Register (LVD_CLR)
The Low-voltage Detection Interrupt Factor Clear Register (LVD_CLR) clears a low-voltage detection
interrupt factor.
bit
7
6
5
4
3
2
1
0
Field
LVDCL
Reserved
Attribute
R/W
-
Initial value
1
-
[bit7] LVDCL: Low-voltage detection interrupt factor clear bit
bit
Description
0
Clears the low-voltage detection interrupt bit (LVDIR) of the Low-voltage Detection Interrupt
Factor Register (LVD_STR) to 0.
1
Has no effect when written. [Initial value]
The read value is always 1.
[bit6:0] Reserved: Reserved bits
The read value is undefined.
These bits have no effect when written.
Note:
− This register is not initialized by the deep standby transition reset.