Cypress FM4 Series - Page 413

CHAPTER 8: Interrupts
FM4 Peripheral Manual, Doc. No. 002-04856 Rev. *E 413
[bit7:2] Reserved: Reserved bits
A reserved bit reads 0.
[bit1:0] MFSINT
bit
Value
Description
1
0
There is no status interrupt request of the MFS channel corresponding to the IRQxxxMON
Register.
1
A status interrupt request of the MFS channel corresponding to the IRQxxxMON Register
has been made.
0
0
There is no transmission interrupt request of the MFS channel corresponding to the
IRQxxxMON Register.
1
A transmission interrupt request of the MFS channel corresponding to the IRQxxxMON
Register has been made.
See Table 3-1 and Table 3-2 for the relationship between exception no. and interrupt.