CHAPTER 7-2: VBAT Domain(A)
272 FM4 Peripheral Manual, Doc. No. 002-04856 Rev. *E
Table 4-1 Operation of On-board Regulator
Figure 4-2 Example of External Connection with Input Voltage (VI) of On-board Regulator Higher than 5.5 V
If the input voltage of the on-board regulator is higher than 5.5 V, the standby pin of the on-board
regulator cannot be directly controlled by the P48/VREGCTL pin.
Execute buffering with an open collector buffer whose voltage resistance is higher than the input voltage
of the on-board regulator.
To Next Page
Loading...
