Cypress FM4 Series - Page 396

CHAPTER 8: Interrupts
396 FM4 Peripheral Manual, Doc. No. 002-04856 Rev. *E
[bit5:0] QUDINT
bit
Value
Description
5
0
There is no PC match & RC match interrupt request of a QPRC channel
corresponding to the IRQxxxMON Register.
1
A PC match & RC match interrupt request of a QPRC channel corresponding to
the IRQxxxMON Register has been made.
4
0
There is no out-of-range interrupt request of a QPRC channel corresponding to
the IRQxxxMON Register.
1
An out-of-range interrupt request of a QPRC channel corresponding to the
IRQxxxMON Register has been made.
3
0
There is no count inversion interrupt request of a QPRC channel corresponding to
the IRQxxxMON Register.
1
A count inversion interrupt request of a QPRC channel corresponding to the
IRQxxxMON Register has been made.
2
0
There is no overflow / underflow / zero index interrupt request of a QPRC channel
corresponding to the IRQxxxMON Register.
1
An overflow / underflow / zero index interrupt request of a QPRC channel
corresponding to the IRQxxxMON Register has been made.
1
0
There is no PC & RC match interrupt request of a QPRC channel corresponding
to the IRQxxxMON Register.
1
A PC & RC match interrupt request of a QPRC channel corresponding to the
IRQxxxMON Register has been made.
0
0
There is no PC match interrupt request of a QPRC channel corresponding to the
IRQxxxMON Register.
1
A PC match interrupt request of a QPRC channel corresponding to the
IRQxxxMON Register has been made.
See Table 3-1 and Table 3-2 for the relationship between exception no. and interrupt.