CHAPTER 12: I/O Port
FM4 Peripheral Manual, Doc. No. 002-04856 Rev. *E 667
[bit25:24] TIOA15S: TIOA15 Input Select bits
Selects input for TIOA15.
Reads out the register value.
Uses TIOA15_0 at the input pin of BT ch.15 TIOA. [Initial value]
Uses TIOA15_1 at the input pin of BT ch.15 TIOA.
Uses TIOA15_2 at the input pin of BT ch.15 TIOA.
[bit23:22] Reserved: Reserved bits
0b00 is read out from these bits.
When writing these bits, set them to 0b00.
[bit21:20] TIOB14S: TIOB14 Input Select bits
Selects input for TIOB14.
Reads out the register value.
Uses TIOB14_0 at the input pin of BT ch.14 TIOB. [Initial value]
Uses TIOB14_1 at the input pin of BT ch.14 TIOB.
Uses TIOB14_2 at the input pin of BT ch.14 TIOB.
[bit19:18] TIOA14E: TIOA14 Output Select bits
Selects output for TIOA14.
Reads out the register value.
Does not produce the output of the BT ch.14 TIOA. [Initial value]
Uses TIOA14_0 at the output pin of BT ch.14 TIOA.
Uses TIOA14_1 at the output pin of BT ch.14 TIOA.
Uses TIOA14_2 at the output pin of BT ch.14 TIOA.
[bit17:14] Reserved: Reserved bits
0b0000 is read out from these bits.
When writing these bits, set them to 0b0000.
[bit13:12] TIOB13S: TIOB13 Input Select bits
Selects input for TIOB13.
Reads out the register value.
Uses TIOB13_0 at the input pin of BT ch.13 TIOB. [Initial value]
Uses TIOB13_1 at the input pin of BT ch.13 TIOB.
Uses TIOB13_2 at the input pin of BT ch.13 TIOB.
To Next Page
Loading...
