Cypress FM4 Series - Page 673

CHAPTER 12: I/O Port
FM4 Peripheral Manual, Doc. No. 002-04856 Rev. *E 673
Selects input for QDU-ch.2 as AIN.
bit
Description
Reading
Reads out the register value.
Writing
00
AIN2_0 is used as AIN, the input pin of QDU ch.2. [Initial value]
01
AIN2_0 is used as AIN, the input pin of QDU ch.2.
10
AIN2_1 is used as AIN, the input pin of QDU ch.2.
11
AIN2_2 is used as AIN, the input pin of QDU ch.2.
Note:
− This register is not initialized by deep standby transition reset.