Cypress FM4 Series - Page 877

CHAPTER 15: SD Card Interface
FM4 Peripheral Manual, Doc. No. 002-04856 Rev. *E 877
Bit
Attribute
Description
12
WO
Force Event for Boot Acknowledge Error
This bit selects whether the Boot Acknowledge Error bit in the Error Interrupt Status
Register is forced to become 1.
1: An interrupt is generated.
0: No interrupt is generated.
Set/Reset
Condition
Set
1 Write
Reset (0)
System reset
Software Reset For All
0 Write
10
WO
Force Event for Tuning Error
This bit selects whether the Tuning Error bit in the Error Interrupt Status Register is forced
to become 1.
1: An interrupt is generated.
0: No interrupt is generated.
Set/Reset
Condition
Set
1 Write
Reset (0)
System reset
Software Reset For All
0 Write
For other details of this register, refer to SD Specifications Part A2.