Siemens SCALANCE W760 Configuration Manual

Network structures
6.1 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
147
Requirement
● The IEEE 802.11n transmission standard is enabled.
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call up the command with the following parameters:
wlan ampdu bytes-limit <bytes(1024-65535)>
The parameter has the following meaning:
Parameters
Description
Values or range of values
bytes
Size of the AMPDU data packet in bytes 1024...65535
Default: 50000
Result
The size for the AMPDU data packets is specified.
Further notes
You display the setting with the show wlan advanced-11n <wlan 0/X> command.
6.1.5.8
wlan ampdu frames-limit
Description
With this command, you specify the number of individual data packets (frames) grouped
together in one AMPDU data packet.
Requirement
● The IEEE 802.11n transmission standard is enabled.
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#

Siemens SCALANCE W760 Specifications

General

Brand	Siemens
Model	SCALANCE W760
Category	Wireless Access Point
Language	English