Siemens SCALANCE W760 - No Snmp Community Index

Network protocols
7.4 SNMP
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
313
Further notes
You delete the details of an SNMP community with the no snmp community index command.
You show the details of an SNMP community with the
show snmp community command.
You show the status information of the SNMP communication with the
show snmp command.
7.4.2.7
no snmp community index
Description
With this command, you delete the details of an SNMP community.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no snmp community index <CommunityIndex>
The parameters have the following meaning:
Parameter
Description
Range of values / note
CommunityIndex
Name of the community
max. 32 characters
Result
The details of an SNMP community are deleted.
Further notes
You configure the details of an SNMP community with the snmp community index command.
You show the details of an SNMP community with the
show snmp community command.
You show the status information of the SNMP communication with the
show snmp command.