Configuration
3.1 System
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
35
The following information about the device is displayed:
● MAC address of the device
● Serial Number
● System up time
● System name
● System contact
● System location
● Device Type
● Restart counter
● Config Save mode
● Config Change: This indicates whether or not the current configuration has been saved.
● Login Authentication mode: This indicates whether the authentication is made locally or
on the RADIUS server.
This command shows information on device-specific vendor and maintenance data such as
the article number, serial number, version numbers etc.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call the command without parameters:
show im
The information is displayed.
To Next Page
Loading...
