Security and authentication
10.2 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
383
wlan security edit key
Description
With this command, you add a WEP or AES key to the key table. You can choose between
several key lengths.
● 5 or 13 ASCII or 10 or 26 hexadecimal characters specify a weaker key (40/104 bits).
● 16 ASCII or 32 hexadecimal characters, on the other hand, define a strong key (128 bits).
Note
iPCF or iPCF-MC mode activated
If you want encryption with AES in iPCF or iPCF
-MC mode, only keys with a 128 bit key
You are in the Interface configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Call up the command with the following parameters:
wlan security edit key <index(1-4)> <key>
The parameters have the following meaning:
Values or range of values
Enter the WEP or AES key.
The WEP or AES key is inserted in the key table.
You display the settings with the show wlan security <wlan 0/X> command.
To Next Page
Loading...
Need help?
General
