Siemens SCALANCE W760 - Show Power-Line-State

Diagnostics
11.1 Diagnostics
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
408 Configuration Manual, 11/2014, C79000-G8976-C351-03
Parameter
The parameters have the following meaning:
Parameter
Description
info
Information
warning
Warning
critical
Critical
Result
The content of the logbook is displayed.
11.1.8
show power-line-state
Description
This command shows the status of the power supply.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show power-line-state
Result
The status of the power supply is displayed.