Siemens SCALANCE W760 - 9 Layer 3 Functions; Nat; Show Nat (Client)

SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
349
Layer 3 functions
9
9.1
NAT
This section describes commands relevant for NAT / NAPT.
Note
The commands are only available with the
following device:
•
SCALANCE W722-1 RJ-45 (MLFB 6GK5722-1FC00-0AA0 and 6GK5722-1FC00-0AA0
(US version))
9.1.1
show nat (client)
Description
This command shows the NAT configuration and the translation list.
Note
This
command is only available in the client mode
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show nat
Result
The configuration and the translation list are displayed.