Siemens SCALANCE W760 - Ethernet Interfaces

Configuration
3.1 System
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
34 Configuration Manual, 11/2014, C79000-G8976-C351-03
3.1.1.2
show coordinates
Description
This command shows the system coordinates.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show coordinates
Result
The system coordinates are displayed.
3.1.1.3
show device information
Description
This command shows information about the device.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show device information