Siemens SCALANCE W760 Configuration Manual

Security and authentication
10.2 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
396 Configuration Manual, 11/2014, C79000-G8976-C351-03
10.2.6.9
no vap communication with own-vap (access point)
Description
With this command, you specify that clients logged on to the same SSID of an access point
cannot communicate with each other.
Note
This command is available only in access point mode.
Requirement
You are in the Interface Configuration mode of the VAP interface.
The command prompt is as follows:
cli (config-if-vapX-0-Y)#
Syntax
Call the command without parameter assignment:
no vap communication with own-vap
Result
The communication option on the same SSID of an access point is disabled.
Further notes
You display the settings with the show wlan security <vapX 0/Y> command.
You enable the function with the
vap communication with own-vap command.
See also
vap communication with own-vap (access point) (Page 395)

Siemens SCALANCE W760 Specifications

General

Product Type	Wireless Access Point
Frequency Bands	2.4 GHz, 5 GHz
Wireless Standards	IEEE 802.11a/b/g/n/ac
Number of Antennas	2
Power Supply	24 V DC
Operating Temperature	-20°C to +60°C
Operating Voltage	24 V DC
Protection Class	IP65
Antenna Connectors	R-SMA
Security	WPA2, WPA3